Part Number: 9PX8KPM
Provides sine wave output and power protection for mission-critical IT installations, edge networks and other advanced network applications. External batteries required to operate.
- Included NETWORK-M2 Gigabit network card enables full remote access and control
- Exclusive ABM technology with 3-stage charging increases internal battery life by 50%
- Interactive LCD interface keeps you updated on critical load information in real time
- Can connect to as many as 12 extended battery modules to add precious runtime
- No internal batteries and requires external batteries to operate
- 3-year limited warranty
8kVA/7.2kW/208V Power Module for IT Installations and Edge Networks
This 9PX rack-mount power module features hardwired input and output connections. It provides reliable AC power protection against blackouts, brownouts, surges and line noise that can damage valuable IT equipment or destroy data. The 9PX8KPM is superlative power management for education, commercial, financial or healthcare networking components, including Cisco switches and servers.
Connects to Battery Backup to Keep You Operational Through Power Outages
Field-replaceable, valve regulated lead acid (VRLA) battery modules (9PXEBM240RT, sold separately) allow you to work through short power failures and give you enough time to safely save files and shut down your system in case of a prolonged blackout. Exclusive ABM technology increases battery life by 50 percent and closely monitors battery health to provide advanced notice when batteries need replacing. You can connect up to five battery modules for hours of extended runtime or up to 12 EBMs with the optional 3U rack-mount 240VDC supercharger (SC240RT, sold separately).
Included Gigabit Network Interface Offers 24/7 Remote Access
The NETWORK-M2 Gigabit network card enables full remote configuration and management, including load shedding, reboots of connected equipment and safe shutdowns. UPS firmware can also be flashed remotely through the NETWORK-M2 without dropping the load, so you don’t have to plan for downtime. The card meets both UL 2900-1 and IEC 62443-4-2 standards for cybersecurity, which were developed to address the vulnerability of connected devices to known malware/exploits and to protect business from these risks. The optional Environmental Monitoring Probe Gen 2 (EMPDT1H1C2, sold separately) provides a variety of environmental monitoring capabilities, including temperature and humidity conditions.
Rotating LCD Interface Keeps You Informed at a Glance
The intuitive front-panel LCD provides control settings and critical information to help diagnose any issues. The interface rotates to accommodate both rack-mount and tower configurations, and it tilts up to 45 degrees for more comfortable viewing.
Advanced Communications Ports Allow for Automatic Saves and Shutdowns
RS-232 and USB ports connect to a serial-enabled device for a variety of communication options (cables are included). A dry-contact relay port can be programmed through the LCD to provide reliable communications to automation and industrial components. The RPO/ROO connectors permit emergency shutdown or remote restart of all connected equipment.
Versatile Installation Options
You can mount the 9PX8KPM in just 3U of space in an EIA-standard 19-inch rack using the included 4-post rail kit. You can also adapt it for tower installation using the included support stands.
|Nominal Input Voltage(s) Supported||200V AC; 208V AC; 220V AC; 230V AC; 240V AC|
|UPS Input Connection Type||Hardwire|
|Output Capacity (VA)||8000|
|Output Capacity (kVA)||8|
|Output Capacity (Watts)||7200|
|Output Capacity (kW)||7.2|
|Frequency Compatibility||50 / 60 Hz|
|Output AC Waveform (Battery Mode)||Pure Sine wave|
|Nominal Output Voltage(s) Supported||200V; 208V; 220V; 230V; 240V; 250V|
|Individually Controllable Load Banks||Yes|
|Battery Type||Valve Regulated Lead Acid (VRLA)|
|Expandable Runtime Description||Add up to 5 extended battery modules (EBM) with UPS; add up to 12 EBMs with SC240RT supercharger module|
|Battery Management||ABM technology (3-stage charging extends battery service life by 50% and provides advance warning for battery replacement)|
SURGE / NOISE SUPPRESSION
|EMI / RFI AC Noise Suppression||Yes|
|Primary Form Factor||Rackmount; Tower|
|Installation Form Factors Supported with Included Accessories||4 post 19 inch rackmount; Tower|
|Minimum Required Rack Depth (inches)||27|
|Unit Dimensions (hwd / in.)||5.100 x 17.300 x 23.500|
|Unit Weight (lbs.)||47.000|
|Operating Temperature Range||32° to 104°F (0° to 40°C)|
|Relative Humidity||0-95% non-condensing|
|Online Mode Heat Dissipation (BTU/Hr) @ Full Load||1570|
|Battery Mode Heat Dissipation (BTU/Hr) @ Full Load||2140|
|Network Management Cards||NETWORK-M2|
|Communications Interface||Pre-installed network card; RS-232; USB|
|UPS Applications||Mission Critical Applications|
STANDARDS & COMPLIANCE
|Product Certifications||NOM (Mexico); cUL Listed; EN 62040-2|
|Product Compliance||FCC Part 15 Class A (USA); CE (Europe); FCC (USA); ENERGY STAR Qualified; RoHS|
WARRANTY & SUPPORT
|Product Warranty Period (U.S. & Canada)||3-year limited warranty|
|Extended Service Plans|
ADVANCED DEPOT EXCHANGE
5-YEAR ON-SITE PLAN: WFLN75XX-11000UC
Questions & Answers
Yes, you can monitor your Eaton UPS with any UPS or facility management software that supports the industry standard Management Information Base (MIB, RFC 1628) as long as you install the optional connectivity card. Most UPS vendors support this MIB and all good facility management software, including OpenManage, OpenView and Tivoli also support it. Extended Eaton Advanced MIBs are available for greater levels of detail. You can remotely control your Eaton UPS using the Eaton UPS management software or through a secure web interface if you choose the optional connectivity card, which also allows for automated email alerts for power events without needing to install any software.
UPS Battery Packs
|9PXEBM240RT||Eaton 9PX 240V Extended Battery Module (EBM) for Select 8kVA to 11kVA UPS, 3U Rack/Tower|
|EMPDT1H1C2||Eaton Environmental Monitoring Probe (EMP) Gen 2 for Temperature and Humidity Conditions|
|9PXTFMR5||Eaton 9PX 5kVA 120V Stepdown Transformer - 18 NEMA 5-20R Outlets, 60 Hz, L6-30P Input, 3 ft. Cord, 3U Rack/Tower|
|BINTSYS||Eaton UPS Battery Integration System with Casters|
|MBP11K208||Eaton 9PX Maintenance Bypass for Select 8kVA to 11kVA 9PX UPS Systems, Hardwired Input/Output, 3 L6-30R Outlets, 3U Rack/Tower|
|SC240RT||Eaton Supercharger for 9PX 8kVA and 11kVA UPS Systems, 240VDC, 3U Rack/Tower|
Documents & Downloads
Useful Web Pages