Eaton
10000 Woodward Avenue
Woodridge, Illinois 60517
+1 773-869-1776
+1 (773) 869-1329
cpdipresaleshelp@eaton.com
United States
Contact Us
CHECK PRICES
Add to Compare

Locking steel cabinet provides 2.4A USB charging, syncing, secure storage and cord management for up to 16 tablets and other devices. Recommended for education, office, commercial, retail, industrial and healthcare environments.

  • Fast 2.4A USB charging and syncing for 16 tablets
  • Secures devices in locking, vented steel cabinet with cart option
  • Protective shelf with removable dividers and cord management
  • Supports mounting to wall, desk, table, counter or floor
  • Ships fully assembled for quick, easy installation
  • 2-year limited warranty

Features

Fast Charging
  • 16 USB ports provide fastest charging supported by each device, up to 2.4A per port
  • Recommended for iPad, Android, Surface and Kindle tablets
  • Also charges mobile phones and other USB devices
  • Fits tablets with cases (up to 16.5 x 10.5 x 1.5 in. with cord)
  • 10-ft. (3.05 m) AC input cord with NEMA 5-15P plug reaches distant outlets

Convenient Syncing
  • USB uplink port connects to host computer for wired syncing
  • Supports wireless syncing and simultaneous syncing/charging (up to 1.5A per port during wired syncing)

Comprehensive Protection
  • Sturdy steel construction and powder-coated finish promote long-term durability
  • Doors lock with included keys to help prevent device theft, damage or tampering
  • 3-point locking mechanism latches doors at top, middle and bottom
  • Built-in hasp and user-supplied padlock can replace or supplement built-in lock
  • Rear ports accommodate user-supplied bicycle cable or chain lock
  • Flow-through ventilation helps prevent devices from overheating
  • Protective shelf specially coated to avoid device scratches and scuffs
  • Cord access ports with rubber grommets protect against abrasions
  • Solid top work surface helps avoid accidental drips and spills that could damage devices

Clutter-Reducing Organization
  • USB ports and charging cords store out of sight
  • Shelf includes charging cord access ports for each device
  • Toolless trim panel permits quick access to cords

Flexible Configuration
  • Ships fully assembled for quick, easy installation
  • Supports mounting to wall, desk, table, counter or floor
  • Split front doors open 180 degrees for improved device and service access
  • Removable dividers accommodate thicker devices like battery chargers
  • Firmware upgrade port for future updates
  • Converts to mobile cart with optional CSHANDLEKIT2 (sold separately)

Package Includes

  • CSC16USB 16-Device USB Charging Station Cabinet, Black
  • (2) Keys
  • Owner’s manual
RoHS compliant

Specifications

OVERVIEW
UPC Code037332194640
Product TypeMulti-Device Charger
Charging Form FactorStationary Cabinet
Charger FunctionsCharge; Secure; Sync
Device CompatibilityTablet
Device Slots16
INPUT
Nominal Input Voltage(s) Supported120V AC
Voltage Compatibility (VAC)110; 120
Input Frequency50 / 60 Hz (auto-select)
Input Plug TypeNEMA 5-15P
Input Cord Length (ft.)10
POWER
Power Consumption (Watts)56
CHARGING
Number of Charging Ports16
Total Charging Amps40A
Total Charging Watts200
Charging MethodUSB
Charging Port TypeUSB A (FEMALE)
Charging Ports DetailsPass through
Charging Ports / Amps(16) 2.4A
Overcharge ProtectionYes
Charging Amps per Port2.4A
PHYSICAL
ColorBlack
Material of ConstructionSteel
Charging Station Form FactorStationary Cabinet
Shipping Dimensions (hwd / in.)24.53 x 23.62 x 33.66
Shipping Weight (lbs.)112.00
Slot Dimensions (hwd / in.)10.6 x 1.5 x 15.4
Unit Dimensions (hwd / in.)18.800 x 30.330 x 20.200
Unit Weight (lbs.)84.66
Number of Shelves1
FEATURES & SPECIFICATIONS
Built-In Circuit BreakerYes
Cord ManagementYes
Overcurrent ProtectionYes
EMI/RFI Line Noise ProtectionYes
Flow-Through VentilationYes
UV SterilizationNo
LockingYes
Lock TypeKey
STANDARDS & COMPLIANCE
Product CertificationsNOM (Mexico); UL 60950-1
Product ComplianceRoHS; CE (Europe); EIA/ECA-310-E; REACH; FCC Part 15 Class B (USA)
WARRANTY & SUPPORT
Product Warranty Period (Worldwide)2-year limited warranty
CATEGORY PAGE FILTERS (Y/N ONLY)
External ReceptacleNo

Questions & Answers

The primary function of Tripp Lite 16/32/48 Port USB Charging Stations is to charge connected devices. As long as AC power is present to the USB charging module and the devices are connected to the USB charging module with the appropriate USB cable and require a charge (are less than 100% charged), the Tripp Lite 16/32/48 Port USB Charging Station will perform the charging function.
Was this information helpful? Yes No
Need more help? Contact Technical Support
Provided that the USB device limit per host controller is not exceeded, off-the-shelf USB hubs will allow synchronization from a single host computer.
Was this information helpful? Yes No
Need more help? Contact Technical Support
There are many variables that affect the time needed for charging. The simple answer is that it will vary depending upon the sync/charge state of the individual devices connected to the Tripp Lite 16/32/48 port USB charging station. When a variety of makes and models of devices are connected, the maximum time should be determined by the device that has the largest battery capacity/sync capacity and the lowest charge/synchronization level.
Was this information helpful? Yes No
Need more help? Contact Technical Support
Some USB devices are designed to charge only when connected to a host device. Tripp Lite 16/32/48 Port USB Charging Stations will charge these devices if a host computer is connected to the available USB 2.0 port on the sync/charge module. Because of device design, only the USB versions of our charging stations will charge devices that require a host connection. In cases where a specific model of device does not charge, please contact our support team and we will create an updated charging profile to accommodate your needs.
Was this information helpful? Yes No
Need more help? Contact Technical Support
Requirements for host computers are determined by the manufacturer of the devices being synced in the Tripp Lite 16/32/48 Port USB Charging Stations. Tripp Lite USB Charging Stations only require that the host computer have a USB 2.0 port.
Was this information helpful? Yes No
Need more help? Contact Technical Support
See All Questions Ask a Question

More Q&As may be available on the CSC16USB model support page.

Accessories

USB Cables

  Model Number Description
USB-A to Lightning Sync/Charge Cable (M/M) - MFi Certified, Black, 3 ft. (0.9 m) M100-003-BK M100-003-BK USB-A to Lightning Sync/Charge Cable (M/M) - MFi Certified, Black, 3 ft. (0.9 m)
USB-A to Lightning Sync/Charge Cable (M/M) - MFi Certified, White, 3 ft. (0.9 m) M100-003-WH M100-003-WH USB-A to Lightning Sync/Charge Cable (M/M) - MFi Certified, White, 3 ft. (0.9 m)
USB-A to Lightning Sync/Charge Coiled Cable (M/M) - MFi Certified, Black, 4 ft. (1.2 m) M100-004COIL-BK M100-004COIL-BK USB-A to Lightning Sync/Charge Coiled Cable (M/M) - MFi Certified, Black, 4 ft. (1.2 m)
USB 2.0 A to Micro-B Cable (M/M), 3 ft. (0.91 m) U050-003 U050-003 USB 2.0 A to Micro-B Cable (M/M), 3 ft. (0.91 m)
USB 3.0 SuperSpeed Device Cable (A to Micro-B M/M) Black, 1 ft. (0.31 m) U326-001-BK U326-001-BK USB 3.0 SuperSpeed Device Cable (A to Micro-B M/M) Black, 1 ft. (0.31 m)
USB-C to USB-A Cable (M/M), USB 3.2 Gen 2 (10 Gbps), Thunderbolt 3 Compatible, 3 ft. (0.91 m) U428-003-G2 U428-003-G2 USB-C to USB-A Cable (M/M), USB 3.2 Gen 2 (10 Gbps), Thunderbolt 3 Compatible, 3 ft. (0.91 m)
Universal Reversible USB 2.0 Cable, 28/24AWG (Reversible A to 5Pin Micro B M/M), 1 ft. (0.31 m) UR050-001-24G UR050-001-24G Universal Reversible USB 2.0 Cable, 28/24AWG (Reversible A to 5Pin Micro B M/M), 1 ft. (0.31 m)

Accessories

  Model Number Description
Mobile Cart Conversion Kit with Handle, Casters and Power Cord Manager for 16-Device AC and USB Charging Stations CSHANDLEKIT2 CSHANDLEKIT2 Mobile Cart Conversion Kit with Handle, Casters and Power Cord Manager for 16-Device AC and USB Charging Stations
SmartRack Rolling Caster Kit, 4 pack SRCASTER SRCASTER SmartRack Rolling Caster Kit, 4 pack

Services & Extended Warranties

Extended Warranty

Part Number Description
WEXT1G Extended Warranty and Technical Support for Select Products – KVM, PDUs, Inverters
WEXT2G Extended Warranty and Technical Support for Select Products – KVM Switches, PDUs, Power Inverters
WEXT3G Extended Warranty and Technical Support for Select Products – KVM, PDUs, Power Inverters

Products

Applications

Where to Buy

Support

Resellers

This Site Uses Cookies
We use cookies to personalize content and to analyze our traffic. We also share information about your use of our site with advertising and analytics partners. To find out more about how we use cookies, see our cookie policy.

I Accept Cookies More Information

Need help with your purchase?
We're always available to help with questions, including product selection, sizing, installation and product customization. Call us at +1 773-869-1776 or email cpdipresaleshelp@eaton.com.